Filling points are the main use of the both the Tank and Bottle setup.

We advise that the filling point is fitted external to the vehicle locker box on either a chassis member or lower vehicle skirt. In both these instances some vehicle modification will be required but the fillers are desinged to non obtrusive and practible wherever possible

Various forms of fillers are at our disposal and all of them can with filling adapters be used whilst touring through Europe to fill with LPG.

Option 1: This Flush filller is the most common filler for motorhome use used as pictured below. It can be fitted to fiberglass, steel and alloy panels with ease but will require a 30mm hole to be drilled to the vehicle side.

Flush Filler kit complete with UK bayonett adapter.	Flush filler point fitted to vehicel Skirt.

Option 2: Is the draw bar option filler complete with mounting bracket and square cap. This filler is good for draw installation or underskirt along side a step, very popular for commercial applications.

Complete draw bar filler kit including cap and mounting bracket.	Main body of filler one peice design Bayonet fitting and threaded to accept filler adapters.	Stainless steel mounting bracket which can be used for this filler or the above flush filler if required.

Option 3: 70mm Round filler body housing complete with bayonet body. This filler is common in the Autogas market for car conversions but will require a 70mm hole to be drilled prior to fitting. The filler like any of the others can be colour coded at extra cost if required.

70mm round filler kit for external panel fitting